Modbus OPC Server R2018
User guide
 
×
Menu
Index
Search
 
   
   
   
 
 © 2018 Kinemics Software, All rights reserved.

Serial channel property

Serial channel property
1

Enable

1. Enable
Channel enable or disable.
2

Optimization

2. Optimization
Enables the server to use all Modbus write functions at the same time when needed.
3

Field name

3. Field name
Name to be shown on the tree for quick id.
4

Name

4. Name
Channel node name.
5

Readonly

5. Readonly
Enabled the control as read only.(No Command will be executed when this property is set to true).
6

Diagnostics format

6. Diagnostics format
Diagnostic Conversion Hex or Decimal.
7

Enable diagnostics

7. Enable diagnostics
Enable channel diagnostics
8

Stop execution

8. Stop execution
Stops all channel execution.
9

Scan rate

9. Scan rate
Sets the channel update rate/poll rate.
10

Baudrate

10. Baudrate
Set the channel Serial Baud Rate.
11

On Error Reset Connection

11. On Error Reset Connection
Reset connection when error occurs by closing the active connection and opening a new one.
12

Com Port

12. Com Port
Set the channel serial port.
13

Databits

13. Databits
Set the channel data bits
14

Handshake

14. Handshake
Set the channel serial handshake
15

Parity

15. Parity
Set the channel serial parity.
16

Serial swap delay

16. Serial swap delay
Not used.
17

Stopbits

17. Stopbits
Set the channel serial stop bits